Best Bullet Pullers On The Market – Reviews and Comparison 2018

Let’s face it…

We all make mistakes in most of our reloading sessions.

Sometimes you get the bullet seated too deep. Other times you forget to put powder into the cartridge case. Or you even crush your case neck when trying to get the roll crimp right.

Heck, some reloaders even forget to prime their cases!

Fortunately, you can count on the best bullet puller to help you safely dismantle your ‘bad ammo’ and re-use its components for your future reloading sessions.

Sounds fantastic, eh?

The fact that the bullet puller comes at an affordable cost means that you’ve got no excuse as to why you shouldn’t have one in your reloading bench today.

With that in mind, I’ve put up this post to help you get a suitable bullet puller for your needs.

Below, I’ll share with you up to 10 most reliable bullet pullers on the market today.

Let’s get into the details…



Editor's Rating


[easyazon_image align="center" height="91" identifier="B001B7ZB4Q" locale="US" src="" tag="huntspot08-20" width="160"]

[easyazon_image align="center" height="160" identifier="B000PCZZO4" locale="US" src="" tag="huntspot08-20" width="160"]

[easyazon_image align="center" height="160" identifier="B0037N6IXA" locale="US" src="" tag="huntspot08-20" width="135"]

[easyazon_image align="center" height="160" identifier="B000N8N1YQ" locale="US" src="" tag="huntspot08-20" width="160"]

[easyazon_image align="center" height="91" identifier="B071P7X4MV" locale="US" src="" tag="huntspot08-20" width="160"]

Why Use a Bullet Puller?

Let’s begin by understanding why every serious reloader should have a bullet puller in their reloading setup

Using a bullet puller helps you successfully remove a bullet from a case that has already been loaded (or is ready for use).

If you suspect that a bullet isn’t in the right condition for use, it’s always recommended that you pull it for your own safety and those around you.

Some of the top reasons why you might want to pull the bullet include:

  • If you suspect to have made a mistake by loading your shell with the incorrect amount of powder or the wrong powder
  • If your bullets get soaked in water which can make the powder wet
  • If your bullets get too much exposure to heat which can affect its accuracy during firing
  • Again, if you suspect your bullets aren’t in the right condition for firing, consider pulling them.

With that said, let’s take a closer look at the 10 best bullet puller reviews below…

10 Best Bullet Puller Reviews:

1. Frankford Arsenal Quick-n-EZ Impact Bullet Puller:

[easyazon_image align="center" height="283" identifier="B001B7ZB4Q" locale="US" src="" tag="huntspot08-20" width="500"]

The Frankford Arsenal Quick-n-EZ Impact Bullet Puller is one of the easiest to use models on the market today. It helps you efficiently and quickly removes bullets from brass without any damage so that you can reuse them later.

The first interesting this about this tool is its incredible level of versatility; it comes with up to 3 collets which enables it to work with nearly all calibers out there. You can trust to work with anything ranging from the 22 Hornet all the way to 45-70 calibers. What’s more, it works with both rimmed and rimless bullets—taking its versatility even higher!

When put to work, the tool holds your casing securely throughout the entire process. This enables it to pull out there bullet from brass without damaging it. This is something not many competitor brands have been able to achieve, making this bullet puller special in a way.

Something else that makes this tool qualify on our list involves its durable construction. It’s made using premium grade materials which enhance its strength, and longevity. Such a design is sure to hold up to powerful whacks repeatedly for longer than you can imagine.

Highlighted features:

  • check
    Comes with 3 different collets
  • check
    Works with calibers ranging from 22 Hornet to 45-70
  • check
    Can work with rimmed and rimless bullets
  • check
    Impact style tool for easy pull bullets
  • check
    Works with a single stern whack to remove the bullet

2. Hornady 050095 Cam Lock Bullet Puller:

[easyazon_image align="center" height="500" identifier="B000PCZZO4" locale="US" src="" tag="huntspot08-20" width="500"]

Second in the line, we have the Hornady 050095 Cam Lock Bullet Puller. Like our model above, this tool is another perfect example of the easiest, fastest way to pull bullets from brass with your press.

Using this bullet puller is extremely easy for both beginner and experienced reloaders. You just need to raise the case into the puller, clamp the puller down on the bullet, and finally raise the press arm and viola— the bullet comes out undamaged!

The fact that it works with the standard collets makes it another versatile model that allows you to work with cases of different calibers. And don’t forget that you can easily mount it to all presses with the standard 7/8"-14 threads for the ultimate versatility.

Above all, the tool features a sturdy steel body plus cast metal handle, which translates to a solid piece that can withstand rough use for an extended period of time.

Highlighted features:

  • check
    Fastest, easiest way to pull bullets from brass
  • check
    Easy to set up
  • check
    Utilizes standard collects (sold separately)
  • check
    Not for use with cast bullets
  • check
    Steel body, cast metal handle

3. Lyman Magnum Inertia Bullet Puller:

[easyazon_image align="center" height="500" identifier="B0037N6IXA" locale="US" src="" tag="huntspot08-20" width="422"]

Lyman Magnum Inertia Bullet Puller takes up our third spot on the top bullet puller reviews. As a product of a reputable brand, Lyman, you can also trust it to safely strip your loaded rounds in a few seconds only.

The main selling point of this puller is its “full-size” ergonomic handle that features rubber inserts. This handle adds extra comfort while providing a surefire grip. Needless to mention, this translates to more effective performance.

Something else that puts this puller on the map is the innovative head design that comes with it. This allows you to use the tool with a wide range of calibers, ranging from the Tiny 5.7 x 28Fn all the way up to the largest Magnums.

Like any other top-quality puller, this model doesn’t cause damage to your bullets so that you can re-use them (and save some bucks in the process).

Highlighted features:

  • check
    Ergonomic molded handle for comfort
  • check
    Works with a full range of calibers
  • check
    Strips loaded rounds in seconds
  • check
    Does not cause damage to the bullets
  • check
    Traps components with only a few raps on bench

4. RCBS 9440 Bullet Puller without Collet:

[easyazon_image align="center" height="500" identifier="B000N8N1YQ" locale="US" src="" tag="huntspot08-20" width="500"]

The RCBS9440 Bullet Puller is like all the other products we’ve previously discussed in that it comes with a durable construction that comprises of the highest quality materials only. For this reason, the tool will walk with you through many years of safe, easy removable of bullets from incorrectly loaded rounds.

Other than durability, this tool is also designed to help you easily pull the jacketed bullets from their casings without causing any damages to them.

Unlike its competition, this puller will work with the standard7/8"-14 threads, which means it’ll easily work with all the single stage reloading presses.

The puller can also work with different caliber collets (not included in the package), which makes it a versatile tool for disassembling nearly all jacketed loaded rounds.

Highlighted features:

  • check
    Made using highest quality materials
  • check
    Hunting reloading bullet puller
  • check
    Designed for easy bullet removal
  • check
    No damages to your bullets
  • check
    Standard 7/8"-14 thread
  • check
    Collects not included

5. AmeriGun Club Quick and Easy Impact Bullet Puller:

[easyazon_image align="center" height="283" identifier="B071P7X4MV" locale="US" src="" tag="huntspot08-20" width="500"]

For the reloaders on a tight budget, the AmeriGun Club Quick and Easy Impact Bullet Puller is the ideal model for you.

The tool won a place on this list due to its incredible versatility. It comes with up 3 different collets which allow you to pull bullets from nearly all types of calibers imaginable. To be exact, the puller can handle anything that ranges from 22 Hornet to 45-70 caliber— regardless of whether rimmed or rimless.

Using this tool is extremely easy for anyone, including the starters. It features an impact style operational mechanism—where you just need one stern whack to separate the bullet from the brass. Because of such an easy, fast removal process, you can count on this tool to remove as many bullets as possible in a short period.

Again, remember that this is the most affordable products on this list and the most suitable model for any reloader on a tight budget.

Highlighted features:

  • check
    Up to 3 different collets included
  • check
    Handles any caliber ranging from 22 Hornet to 45-70
  • check
    Works with both rimmed and rimless bullets
  • check
    Impact style puller for easily extracting bullets
  • check
    Require a single stern whack to remove the bullet

6. Redneck Convent Impact Bullet Puller Tool with 3 Expandable Collets:

[easyazon_image align="center" height="398" identifier="B073X55B68" locale="US" src="" tag="huntspot08-20" width="500"]

Redneck Convent Impact Bullet Puller is built to last and last. It features a polycarbonate impact style body plus solid metal shaft that equates to unmatched sturdiness and longevity.

It is also an extremely easy to use tool that comes with easy-to-follow, step-by-step instructions included. The recessed, expandable collect lets you easily capture and grip the casing rim/lip and hold it into place. The included O-rings clamp the parts of the collet together to provide clamping pressure on the case. All this makes it possible to separate the bullet from the case with one firm Whack!

Another interesting thing about this puller is its ability to work with almost all the caliber that range from22 Hornet to 45-70s, whether rimmed or rimless. This is made possible by the 3 different sized collets that come with the package.

And the best part? It also comes with a comfortable grip, 4-inch long, deep profile handle with texturing and molding. This offers a truly secure grip and reduced and fatigue when working on your loaded rounds.

Highlighted features:

  • check
    Can handle almost any caliber from 22 Hornet to 45-70
  • check
    Works with both rimmed and rimless calibers
  • check
    Durable polycarbonate construction
  • check
    Comfortable grip handle
  • check
    Step by step instructions included

7. RCBS Pow'r Pull Kit:

[easyazon_image align="center" height="500" identifier="B004Y6YP4I" locale="US" src="" tag="huntspot08-20" width="500"]

This is another popular bullet pulling tool from RCBS. The Pow'r Pull Kit. And just like its causing above, this product is also made in the USA using the highest quality materials available for maximum durability and increased lifespan.

One area where this bullet puller excels is how comfortable it feels in your hands. It comes with an ergonomic handle that perfectly fits your hand contours—ensuring you remain comfortable during the entire bullet pulling process.

It’s also interesting to note that it comes with up to 3 collets of varying sizes to help you work on different case calibers easily.

The extremely easy to use tool requires you to make a few steps only to get it up and running you just slip the cartridge case into its place/slot, then ensure the collet is securely tightened. When that’s done, slam the tool on the ground, and the bullet will get separated from the casing in no time.

Don’t forget that this bullet puller works pretty first as it requires a few whacks only to get the bullet out of the brass, allowing you to work on many casings in a short period of time.

Above all this, it comes with a deep profile handle that facilitates comfortable handling and eliminates hand fatigue when using it.

Highlighted features:

  • check
    Made of highest quality materials
  • check
    Hunting reloading bullet puller
  • check
    Resolves mistakes easily and quickly
  • check
    Ergonomic handle

8. Hornady 50090 Kinetic Bullet Puller:

[easyazon_image align="center" height="203" identifier="B000PD5UR0" locale="US" src="" tag="huntspot08-20" width="500"]

Still looking for the best kinetic bullet puller? If yes, consider investing in this Hornady 50090 Kinetic Bullet Puller for the best bullet pulling performance and experience.

The number one reason why you’ll like this kinetic bullet puller is based on its innovative design. That is, it features a unique hollow head design which perfectly captures the bullet and powder. This guarantees the reloader of getting the bullet and powder undamaged and using them for future reloading sessions.

Additionally, this bullet puller is quite versatile as it’s compatible with nearly all bullets. You can work on both rifle and pistol cartridges using it. It can easily accommodate bullets all the way to 45 caliber.

Like the other products on this list, it also allows you to effortlessly extract the bullet from the casing without causing excessive damages to it. And this means you can reuse them in future (and save yourself some cash).

Keep in mind that this tool is designed to be extremely easy to use for you. It lets you extract most bullets with only a few whacks, ensuring you don’t break a sweat before completing the extraction process.

Highlighted features:

  • check
    A reliable kinetic bullet puller
  • check
    Suitable for pistol and rifle cartridges up to 45 caliber
  • check
    Remove bullets from casings without damage
  • check
    Hollow head easily captures the powder and bullet for reuse

9. MEC 1311095 Bullet Puller:

[easyazon_image align="center" height="307" identifier="B0728LTQ5P" locale="US" src="" tag="huntspot08-20" width="500"]

MEC 1311095 Bullet Puller is a hammer style model that also allows you to disassemble your loaded ammo with ease.

It comes with a simple design which makes it easy to use for beginners as well as expert reloaders. To use this tool, you just need to insert the bullet with corresponding cap piece and then what it against a hard surface. With just a few whacks, you’ll get the bullet and the brass apart.

Note that the puller does not cause much damage to your rounds, meaning you can use the resulting components (powder, brass, and bullet) in your next reloading session.

It’s also worth acknowledging that this model features a comfortable grip handle that easily matches your hand contours. This is important for anyone working on tons of cases as it helps minimize user hand fatigue.

Highlighted features:

  • check
    Disassembles bullets easily and quickly
  • check
    Extremely easy to operate
  • check
    Does not damage your bullet
  • check
    Comfortable grip handle

10. Hornady 050091 Lock-N-Load Impact Bullet Puller:

[easyazon_image align="center" height="500" identifier="B0787LBCJR" locale="US" src="" tag="huntspot08-20" width="500"]

Closing our list is another best bullet puller hammer from Hornady— the 050091 Lock-N-Load Impact Bullet Puller.

The bullet pulling tool comes with 3 collets of varying sizes which makes it the ideal model for working on different case calibers. According to Hornady, the three collets will handle everything lying between .22 up and .45 caliber.

Unlike most of the bullet pullers out there that end up damaging the bullet during the extraction process, this Hornady is an exception. It safely dismantles your loaded rounds without damaging the components. This means you can use them in your next reloading sessions and save some bucks you might have spent buying new supplies.

Better yet, the puller comes with a hollow head design that easily traps all the components of the disassembled round— powder and bullet— facilitating their reuse.

And like all the other products we’ve featured in this list, the Lock-N-Load Impact Bullet Puller comes with a sturdy (polymer) construction for the ultimate durability and longevity.

Highlighted features:

  • check
    Strong, durable polymer construction
  • check
    Extras bullets from brass without damaging them
  • check
    Hollow head design for trapping the powder for reuse
  • check
    3 different collet sizes allow the tool to work on various bullet calibers

Bullet Puller Buying Guide and Instructions: Things To Look For

Because bullet pullers aren’t created equally, getting the right model for you might be a bit tricky.

That’s why I’ve put up the brief guide below to show you exactly what to look for when making a purchase:

Type of bullet puller

There are two common types of bullet pullers you can find on the market today— the inertia (kinetic) and the press-mounted (or the collet style) models.

The former is excellent for entry-level reloaders who have a few rounds to work on.

However, for the reloaders with dozens of rounds to work on, you should consider getting the collet style bullet puller. This model is known to work faster and easily, making it ideal for big jobs.

Quality of construction material

You should also ensure that the bullet puller you intend to invest in is constructed from premium materials to ensure its durability and longevity.

If you look at the impact puller, its operation involves whacking it over and over again on a hard surface. As such, you’d want to ensure it has a sturdy construction to withstand the tough usage over and over again.

Ease of use/handling

Considering that operating the tools is more like swinging a hammer again and again, the bullet process can be tiring.

This explains why you should always look for an easy to handle model that comes with an ergonomic handle. This ensures that you’ll still be able to maintain a firm grip on your handle, even after a thousand swings—ensuring the overall efficiency and effectiveness of your job.

While still on it, make sure the model you wish to buy is also extremely easy to set up and run, especially if you’re a beginner who has never removed bullets from a casing before.

Consider the brand name

Shopping for your bullet puller by brand will also help you get a reliable, quality tool easily.

You just need to make sure you buy your tool from some of the highly reputable names in the fields- like Hornady, RCBS, Frankford, or Lyman.

These brands have earned respect from reloaders across the globe for their commitment and dedication to providing you with top-quality reloading tools and accessories, including top-notch bullet pullers.

What type of calibers do you reload?

If you plan to remove bullets from a wide variety of calibers (which I believe you do), it’s always a good idea to look for a versatile tool that can handle various calibers or bullet diameters.

HOT TIP: Look for a bullet puller that doesn’t damage your casings during the removal process. This is important to ensure you can reuse all the components of the case, including the powder, projectile, and the brass so that nothing gets lost.

DIY: Can You Make a Bullet Puller Of Your Own?

Yes, you can! In the video below, you’ll get easy to follow, step by step directions on how to come up with your own kinetic bullet puller using readily available and affordable materials.

How Bullet Puller Works?

As we’ve stated earlier on, there are two common types of bullet pullers available today—the inertia and press mounted bullet pullers.

Let’s get to know how each of them works:

(i). Inertia bullet puller

The inertia model employs the simplest working mechanism. The model resembles a hammer with its head designed using high impact plastic plus a threaded cap at the rear end. It usually comes with up to 3 collets to help you easily hold the diameters and rim shapes of the most popular cartridges out there.

To use this bullet puller, simply insert your cartridge into the right collet, and screw on the threaded cap. Then, beat the hell out of that shell by smacking it against a hardwood block or metal surface until an abrupt stop of the hammer that forces the bullet out of the case.

(ii). Press-mounted bullet puller

The press-mounted tool is the most popular models among reloaders. A typical model looks like a little rig that with a body that looks like reloading die, caliber specific collets, and a threaded screw cap.

To use the bullet pullet, you start by loosely threading the collet into the cap to raise the press ram, and thus secure the bullet into the collet. Next, tighten the cap to firmly grab the bullet. Now, with a simple downstroke of the ram, the case will get pulled away from the bullet.

Note that if you use your bullet puller correctly (regardless of the model), the bullet will come out intact and you can reuse it for reloading again. As for the case, you can dump the powder, inspect the case (resize if need be) and reuse it as well.

IMPORTANT: Here are a few things to keep in mind when using your bullet puller:

  • When removing a bullet from the loaded shell, ensure there are no debris or obstructions under the round or in the shell holder
  • Avoid engaging the primer seating accessory when working with the loaded rounds. Contacting the primer can cause the loaded round to discharge
  • NEVER think of using rimfire with your bullet puller as they result in rounds going off, and thus a chamber
  • Always ensure your head, torso remains away from the bullet puller

RCBS vs. Hornady Bullet Puller

Both RCBS and Hornady (these are the top names in the manufacturing industry btw) design the collet-style bullet pullers.

However, their tools employ different mechanisms for tightening the collet around the bullet.

The Hornady Cam-Lock bullet puller employs a lever-arm situated on the bullet puller top to help tighten the collect around your bullet.

The RCBS bullet puller, on the other hand, grabs the bullet using an internally threaded head. You simply rotate its lever in a clockwise, in a horizontal circle, to help squeeze the collet around your bullet.

So, which of the two models should you choose?

Previous users explain that Hornady is extremely easy to set up and use, and they perform quite faster at removing the bullets compared to the RCBS tool.

The only downside of Hornady tool is that it can do damage- leave marks- on your bullet.

The RCBS tool does not cause damage to your bullets, meaning you can safely reuse them to load your shells. However, most users complain that using this tool is a real pain.

With this information at hand, I believe you’ll be better off picking a bullet puller will work for you from the two models.

Final Verdict

That’s all you need to know about the best bullet pullers on the market today. As a quick reminder, the bullet puller is a crucial tool to have on your reloading bench. It helps you disassemble the incorrectly loaded ammo safely and reuse its components for your future reloading process.

Getting the right best bullet puller for your needs can be a challenge due to the multiple models (from various brands) on the market today. Luckily, our buying guide will help you pick a top-quality, reliable bullet puller like a pro.

And oh! If you want to save time, get your bullet from the top 10 models that I’ve just picked for you above. These come at great, affordable prices. Plus they’re highly reliable.

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

Visit Us On FacebookVisit Us On PinterestCheck Our Feed